Xavfsizlik Operatsion protseduralari uchun Edge silliqlash Machine

1. Before starting work, check the equipment to ensure it is in normal condition.
2. Operators must wear gloves and masks or dust prevention equipment. The doors and windows in the work area should be closed to to prevent silica chang from escaping. The ventilation and dust remove device must be intact and effective.
3. Ehtiyot choralari uchun oldindan ish tekshirish% 3a
(1) The tightening nut of the silliqlash g'ildirak must not be loose;
(2) The grinding wheel shall not have cracks or gaps;
(3) The xavfsizlik qopqoq is to'liq yig'ilgan va ishonchli;
(4) The old va orqa % 2c yuqori va past uzatish tutqichlar ishlatish moslashuvchan holda har qanday shovqin davomida operatsiya.
4. When silliqlash the edges of steel plates, the adjustment size of the silliqlash g'ildirak kerak be strictly controlled, and the silliqlash amount kerak kerak not be too large at a time to avoid causing damage to the steel plate and breakage of the silliqlash g'ildirak.
If there is a fault during silliqlash, such as the steel plate getting stuck, the main switch should be darhol o'chirilgan off% 2c va temir plastinka kerak be olib tashlandi keyin parking.
6. During production% 2c alalways pay attention to check whether the motor is isitish up or running anormally.
7. When stacking steel plates (eparticularly cold-hadde plates and oil plates), pay attention to being neat, not skewed, not higher than 1.2 meters, and not colliding with each other to avoid slipping and injaring people.
8. When feeding and transporting steel plates, they should be held firmly and placed upright, and should not be thrown randomly to avoid injury.
Qachon shamollatish va chang olib tashlash qurilma muvaffaqiyatsiz% 2c it kerak to'xtatish ish yoki olish choralar.
10. After completing the work, turn off the switch and do a good job of cleaning.